AVE DRT16 Uživatelský manuál

DVRRemote User’s Manual V1.3 00P279100ASEA3

4. Basic Operation After the connection between your PC and the remote DVR unit is successfully made, the DVRRemote main window displays as below fi

4.1.1 Selecting Display Mode You can indicate the number of windows displayed on the main window. Click one of the display keys which is positioned

4.1.3 Operating Cameras with Dome Control DVRRemote allows you to control and configure a dome camera remotely. Click on any CAMERA key to view

Focus Use to adjust the camera lens to focus on objects for a clear view. Click the adjusting keys to modify the focus setting. Iris This item is use

4.2.2 To Playback Instant Recording Video Follow the steps to playback a video recording instantly: • Click <Play> on main window toolbar an

• View the video playback using the Playback controls. The Playback controls information refer to Section 4.3.3 Playback Controls. • After playback,

5. Configuring the Remote Unit Click <MENU> key on the toolbar to configure a DRT16 / DRT8 DVR series unit remotely. The Configuration menu d

The items in Configuration menu are described in the table below. Item Description System Setup Configures the system related items on the remote un

5.1 System Setup The System setup screen allows user to set language, date/time, and RS-485 settings on the remote unit. Click <MENU> key on

5.1.2 Language The Language menu allows users to select the system language for OSD menu and screen messages of the remote unit. Language selection

2Content 1. Overview ...4 2. System R

5.1.3 Date / Time Click <Date/Time> to display the Date/Time menu, shown as follows. The menu allows user to configure the date/time related

21Time Display Mode To set the time format of the remote DVR unit in 12 hour or 24 hour. The default setting is <24 HR>. Date/Time Order To se

5.1.4 Unit Name The item is used to change the unit name of the connected remote DVR unit. To change the unit name, type the new name in the field

5.1.5 Network Setup This item allows the user to setup the DDNS automatically or manually. Dynamic Domain Name System (DDNS) allows a DNS name to b

- ezDDNS ezDDNS enables the users to register the host name automatically. NOTE: The DVR must be connected to the *Real IP address, or be assign

• Baud Rate Allow user to specify the baud rate for RS485 port. The available options are <2400>, <4800>, <9600>, <19200> and

5.2 Camera Setup Camera Setup menu allows users to configure camera-related items of the DVR unit remotely. Click <MENU> key on the main windo

Camera Title Allow users to set a title of camera connected to the unit (up to 11 characters). The title will be displayed both on the remote DVR unit

5.3 Record Setup Record Setup menu allows users to set record-related items, such as recording schedule, pre-set configuration, pre-alarm recording

29• Day/ Night Time End Day Time Start/ Night Time End determine the end time of daytime and nighttime, respectively. The option is indicated in 1-m

35.4.4 Event Full Screen...37 5.4.5 Event Duration ...

5.3.2 Preset Configuration <Preset Config> is used to select the preset recording quality and frame rate. Different default recording quality

The preset conditions override any other quality and rate settings. The default Preset Configuration setting is <Standard>. Record Mode: Full

5.3.3 ezRecord This item aims to avoid the complicated record settings, and to make the setup much easier. To setup the ezRecord Setup, follow these

5.3.4 Circular Recording Users are able to record video either in circular mode or in linear mode. If you choose to record in circular mode, then th

5.4.1 Internal Buzzer This item allows user to enable / disable the unit’s internal buzzer. If set to <ON>, the buzzer is activated in respons

5.4.2 Event Icon Users are able to enable (ON) / disable (OFF) the display of Event Icon on the monitor when an alarm event occurs. The default sett

5.4.3 Alert Notification Setup This function allows the user to send alert notifications through the CMS program. For detailed setup instruction, p

5.4.4 Event Full Screen This function sets the DVR to display Full Screen in Main, Call, or Both monitors when an event takes place. 37

5.4.5 Event Duration Determine the duration of the buzzer and Alarm Out relay function after an alarm is triggered. The available event duration ran

Motion Detect Used to enable or disable the motion detection function of the DRT16 / DRT8 DVR series. By default, the value is <OFF>. If moti

1. Overview DVRRemote is a remote browser-based software application designed to operate with DRT16 / DRT8 DVR. By using the software, users are all

• Area Threshold <Area Threshold> indicates the motion alarm triggered level; if the percentage of triggered grids to total detection area is g

6. Trouble Shooting Guide 6.1 No Image Displayed after Connecting If you have done all the internet settings mentioned in the Section 3.1 Changi

• Click <Custom Level>, and below figure displays. • Under <All ActiveX controls and plug-ins>, set all items to <Enable> or <

• Select <Tools> from the main menu of the web browser, then <Internet Options>, and then click the <General> tab. • Click the &

Appendix: Setting up a DVR behind a Router This appendix describes how to set up a router if the DVR connects to the internet via a router. To proper

Following is an example of how the router should be set. Router (D-Link DI-724P+) WAN IP: 218.160.54.13 LAN IP: 192.168.0.1 PC IP: 192.168.0.100 DVR

• Click <Continue> to go on when the following screen displays. • Follow the steps to set up web port forward to DVR 2. A. Click <Ena

3. Getting Started with Setup Procedures Refer to the following descriptions to install the DVRRemote remote software. 3.1 Changing Internet Se

• Disable Require server verification (https://******) for all sites in this zone. Type the IP address of the unit in field and click <Add> to

• The ActiveX controls and plug-ins dialog will show twice for confirmation, click <YES> to accept ActiveX plug-ins. The DVRRemote plug-ins wil

3.2.1 Log in / Log off DVRRemote allows up to four “Users” to access a DRT16 / DRT8 DVR series unit at the same time. The following steps demons

3.2.2 Software Upgrades When a new version of DVRRemote software is available on your DRT16 / DRT8 DVR series unit, it will be automatically install